GRP MOULDED GRATINGS

GRP Moulded Gratings are also available with vinylester or phenolic resin. All kinds of resin are self-extinguishing and UV-stabilized.

Standard dimensions

GRP Grating 14 mm height, mesh 13x13mm	GRP Grating 35 mm hight, heavy duty, mesh 28x28mm
GRP Grating 15 mm height, mesh 44x44mm	GRP Grating 38 mm height, mesh 31x31mm
GRP Grating 25 mm height, mesh 31x31mm	GRP Grating 38 mm height, micro, mesh 13x13mm
GRP Grating 25 mm height, micro, mesh 13x13mm	GRP Grating 38 mm height, mesh 88x17mm
GRP Grating 25 mm height, mesh 76x76mm	GRP Grating 40 mm height, mesh 76x76mm
GRP Grating 30 mm height, mesh 31x31mm	GRP Grating 50 mm height, mesh 42x42mm
GRP Grating 30 mm height, micro, mesh 14x14mm	GRP Grating 50 mm height, micro, mesh 17x17mm
GRP Grating 30 mm height, micro, mesh 8x8mm	GRP Grating 50 mm height, heavy duty, mesh 26x26mm
GRP Grating 30 mm height, mesh 93x18mm	GRP Grating 60 mm height, heavy duty, mesh 26x26mm
GRP Grating 30 mm height, heavy duty, mesh 28x28mm

► Comparing Load Table

Construction

GRP Gratings are produced by wet moulding and hot curing in a heated mould. The reinforcement consists of continuous fibreglass rovings in alternating layers, so the loads are distributed evenly in all directions.

Design

Regularly Moulded GRP Gratings have a polyester resin matrix. Glass content is approximately 35%. Standard colours are green, yellow or grey, other colours are available according to RAL.

Accessories

Applicable for our gratings we have special support angles which are concreted into the basement directly.